Ooya Model RE-0M with Fanuc Control
Stock Number: 201796
Age: 1980
Condition: Fair
Click to view larger photo
Request a quote on stock# 201796
Equipped With:
EQUIPPED WITH:
Fanuc #6M CNC Controls
20-Position Automatic Tool Changer
CATALOGUE SPECIFICATIONS:
Table Dimensions Overall, W x L 18.875" x 43.31
Table Working Surface, W X L 15" X 37.75"
Table Load Capacity 1210 LBS
X-Axis Table Longitudinal Travel 31.5"
Y-Axis Saddle In/Out Cross Travel 15.75"
Z-Axis Spindle-Head Vertical Travel 16.75"
Spindle-Nose To Table-Top, Minimum 4"
Spindle-Nose To Table-Top, Maximum 20.625"
Spindle Center to Column Surface 18.5"
Spindle Taper, ISO #40
Spindle Speeds, Infinite Range 50 TO 5000 RPM
Feed Rate, Infinite Range .01 TO 360 IPM
Power Rapid Traverse, X & Y Axis' 550 IPM
Power Rapid Traverse, Z Axis 275 IPM
Spindle Motor, Horsepower Rating 7.5 HP
Floor Space Required, W X D 13' X 7'7"
Overall Height 8'7"
Weight, Approximately 10500 LBS
EQUIPPED WITH:
Fanuc #6M CNC Controls
20-Position Automatic Tool Changer
CATALOGUE SPECIFICATIONS:
Table Dimensions Overall, W x L 18.875" x 43.31"
Table Working Surface, W X L 15" X 37.75"
Table Load Capacity 1210 LBS
X-Axis Table Longitudinal Travel 31.5"
Y-Axis Saddle In/Out Cross Travel 15.75"
Z-Axis Spindle-Head Vertical Travel 16.75"
Spindle-Nose To Table-Top, Minimum 4"
Spindle-Nose To Table-Top, Maximum 20.625"
Spindle Center to Column Surface 18.5"
Spindle Taper, ISO #40
Spindle Speeds, Infinite Range 50 TO 5000 RPM
Feed Rate, Infinite Range .01 TO 360 IPM
Power Rapid Traverse, X & Y Axis' 550 IPM
Power Rapid Traverse, Z Axis 275 IPM
Spindle Motor, Horsepower Rating 7.5 HP
Floor Space Required, W X D 13' X 7'7"
Overall Height 8'7"
Weight, Approximately 10500 LBS
EMC Leasing Company
3208 Fosca Street
Carlsbad, CA 92009
760-633-4801
sales@surplusmachines.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers
www.MacDB2000.com
