Request a quote on stock# 201850| Specification | Description |
|---|---|
| Maximum Swing inside chuck guard (ins) | 16 |
| Maximum Swing over table without chuck guard (ins) | 23 |
| Maximum Swing Workhead swiveled (ins) | 12 |
| Angular Adjustment of Workhead (degrees) | 90 |
| Wheelslide Crossfeed Travel (ins) | 1.5 |
| Workhead Cross Slide Travel (ins) | 15.5 |
| Maximum Table Travel (ins) | 20 |
| Maximum Grinding Stroke (ins) | 16 |
| Minimum Stroke (ins) | .125 |
| Center of Workhead Spindle to Floor (ins0 | 46 |
| Workhead Spindle Flange Type | D1 ASA |
| Standard Cam Lock Spindle Nose (ins) | 6 |
| SPEEDS & FEEDS: | |
| Table Speeds (F.P.M.) | to 25 |
| Workhead Speeds (Reversable) (rpm) | 50 to 425 (Variable) |
| Power Crossfeed Increments (on dia.) (ins) | .00025 to .00192 |
| One Turn of Crossfeed Handwheel (on dia.) (ins) | .050 |
| One Turn of Workslide Handwheel (ins) | .125 |
| MOTORS: | |
| Pump Motor (hp) | 3 |
| Wheel Head Motor (hp) | 5 |
| Electrics | 440V 60 Cycle 3 phase |
| FLOOR SPACE & WEIGHT: | |
| Floor Space with Coolant Tank (ins) | 111 x 67 |
| Approx. Weight (lbs) | 6,800 |
EMC Leasing Company
3208 Fosca Street
Carlsbad, CA 92009
760-633-4801
sales@surplusmachines.com
Asset Sales and Marketing Software for Used and Surplus Industrial Machinery and Equipment Dealers